Objective
Looking for a challenging career with better opportunity in the field of Marine Engineering (Shore Job),Mechanical Engineering, Port Engineer, Shipping, Dry docks, Oil & Gas,Refinery, Power Sector, Utilities, Service Companies, Surveying/Classification Sector, Operations & Maintenance Companies,etc. Which will enable me to utilize the Professional knowledge and skills I have acquired throughout my experience & education.
Preferred Job in Middle East & other Countries also acceptable. I am in a position to relocate with my family.
My Last drawn salary was 6000 US $/month.
My Current salary in Saudi Arabia is 11,000 SR With Executive Car, Cell Phone(Inclusive Bill), Full Family status & Furnished Accomodation.
Experience
1) Presently Working with Lloyds as Marine Engineer surveyor, Port Engineer Surveyor, Industrial Engineer Surveyor. Jeddah(Saudi Arabia) (Jan 2009- Present)
2) 5 years on Oil Tankers, Oil handling, Transportation, Processing.
On British Gas Charterer, Chevron & other International MNC.
3) Worked as Mechanical Marine Engineer (O&M) with SWIWER Singapore based shipping company, on Dynamic Positioning Vessel ,MSV,PSV, OSV. (Dec 2007- Dec 2008).
4) Worked as Mechanical Engineer (Operations & Maintenance) with CHEVRON.(May 2006- Dec 2007)
5) Sailed As 2nd Engineer Second Engineer With BHN.
6) Sailed as 3rd Engineer Marine Engineer Officer On Aframax Oil Tanker / Oil & Bulk Carrier (OBO) with TANKER PACIFIC (May2004-May 2006).
Sailed As Junior Engineer Two Contracts On Aframax Oil Tanker.
Worked on DRY DOCK For OBO Conversion.
7) Worked With Godrej oils As Overall Plant Maintenance Engineer for OIL REFINERY . (June2003-May 2004)
8) Worked With Jindhal Steel As Overall Plant Maintenance Engineer for STEEL PLANT. (June2002-May 2003).
9) Worked as Third Party Inspector With Shindey Consultancy in Quality Control.
Education
1.Marine Engineering (MCA) United Kingdom.
2. Bachelor of Engineering in Mechanical Engineering from Amravati university (AICTE Approved & Member of Washington Accord ) FIRST CLASS.(1999-2002)
3. Diploma In Mechanical Engineering from MSBTE- AICTE Approved (First class).(1996-1999)
4. Post Graduate Diploma in Piping Technology From IIT (Indian Institue Of Technology) Bombay.(2002MAY)
Certification
5. IDEAS CAD-CAM. Integrated Design Engineering Analysis System, Design Software.
6. Certificate course in Personal Safety & Social Responsibility (DGS &STCW Approved)
7. Certificate course in Personal Survival Techniques (DGS & STCW Approved)
8. Certificate course in Fire Protection and Fire Fighting (DGS& STCW Approved)
9. Certificate course in Elementary First Aid (DGS & STCW Approved)
10. Oil Tanker Familiarization.
11. Chemical Tanker Familiarization.
12. Advance Oil Tanker Familiarization.
13. Medical First Aid.
14. Personal Survival Craft And Rescue Boat.
15. Advance Fire Fighting.
16. Boiler Course for Engineers.
17. Engine Equipment Maintenance Workshop.
18. Advance Hydraulic Workshop.
19. NABCO.
20.Proficient in Security Operations UK.
21.Safety and Environment Management Systems Program.(SEMSP)
22. Behaviour Based Safety Program. (BBS)
23. Certificate course in Helicopter Under water Escape Training. (HUET)
Skils
Professional with comprehensive & wide spread experience in Project Management, Operations & Maintenance (Offshore / onshore), Installation & Commissioning & Man Management. Presently working with AIS Lloyds, Jeddah (Saudi Arabia) as Marine Engineer Surveyor. A strategic planner with extensive experience in managing operations of large groups with demonstrated leadership qualities; conceptualizing and implementing measures in the operating procedures to optimize resource & capacity utilization in inhospitable terrain & climatic conditions with multi-skilled work force in cross-cultural environment.
Gained exposure in Safety, Risk Assessment, Engineering skills on Static & Rotating Equipment, Pumps, Compressors, Turbines, Purifiers, Power Generators (HFO,MDO,DO), Main Engines (Caterpillar, MAN B&W, Wartsila, Sulzer), Boilers, Marine Survey, Industrial Survey, Port Survey, Cargo Survey, Engineering Survey, Certifications, Report writing, etc. Have successfully managed the operations, repair and maintenance work of a wide range of machinery, systems and equipments in the, Dockyard, Ship Building Yard, Offshore & Sailing and Onboard Vessels.
Experienced in troubleshooting & problem resolution; training and supervising Engineers & technicians in quality, ensuring adherence to work order specifications and equipment maintenance.
Competencies Include:
- Project Management - Resource Management - Inventory Control - Operations & Maintenance
- Installation & Commissioning - Safety Management - Material Management - Cost Management & Control
_________________________CORE COMPETENCIES
? Handling project activities involving working out various requirements with respect to facilities, utilities, equipments, manpower & monitoring overall project operations completing it on time & in the defined budget.
? Preparing manuals & work instructions for operations for the unit and maintaining reports for facilitating decision making by the management.
? Managing work force & formulating processes, procedures for repairs and maintenance activities. Coordinating all technical squads including vessel engineering staff and subcontractors.
? Serving as a single point of contact for various operational ships & their berthing and liquidation of defects. Controlling and checking of spares & stores including costing & ordering & onward dispatch to vessel.
? Planning and effecting preventive maintenance schedules of various marine equipments like boilers, steam turbine, gas turbine, compressors, AC and refrigeration plants, diesel generators , MAN B&W two stroke diesel engine, Gas Turbine Generators to increase machine up time & equipment reliability.
? Executing cost saving and energy saving techniques/measures and modifications to achieve substantial reduction in O&M Expenditures and work within the budget.
? Handling the design, erection, testing and commissioning of equipment, also providing utility services to the equipments. Accountable for Plumbing, Carpentry, Fitting, Lather Machines Operations, Welding, Mechanical Workshop Operations, Black Smithy, etc.
? Troubleshooting problems arising in the total execution of job with minimum time lag. Taking stringent quality measures including preparation / maintaining necessary documents and to ensure compliance with standards.
? Liaison with ship classification society for the timely approval of the drawings & survey/inspections at site.
? Planning effective manpower deployment & works scheduling of qualified workforce; addressing training needs of staff to enhance skills.
? Handled Condition Survey on Ships, Bunker Survey, Draft Survey, Cargo Survey, On /Off hire Survey, Towage & other marine Survey’s.
? Contracted for Plant condition surveys during periodic or repair shutdowns. My industrial inspection and quality control services can support the requirements for independent testing, as mandated by Quality Management Systems such as ISO-9000, ISO-14000, etc.
? Specialized in conducting Non-Destructive Testing (NDT) inspections and failure analysis. We can establish the cause and extent of losses and advise on preventive measures.
? Performed a thorough assessment of machinery in order to prepare detailed repair specifications. This service allows owners and managers to obtain meaningful quotations.
? Validated the safe operation of lifts, lifting equipment and elevators. If the equipment passes the tests, an official certificate can be issued.
? Accomplished inspections of Oil Rigs (both land and sea based) to establish the condition of the rigs and make recommendations for their safe operation. I conduct NDT procedures to study the condition of the rigs.
? Accounted for Periodical inspections of Boilers and Pressure Vessels are conducted by me professionally. These inspections are conducted during their annual shutdown period. Necessary, recommendations are made to ensure safe operation of these equipments.
? Gained expertise to conduct industrial safety inspections and commercial loss prevention studies that take security, safety & health, and business continuity into consideration.
? Extensive experience with inspections of Industrial plants Power plants, Conveyor systems & silo equipment, Cold storage equipment, Pumping stations, Oil Rigs, Pressure vessels, Boilers, Heat exchangers & valves Water and petroleum piping arrangements Pumps & compressors, Construction equipment, safety equipment.
? Operations & Maintenance of Pumps (All types), Compressors (Air, Refrigeration, Air Conditioning), Turbines, Purifiers( Alfa Laval, Mitsuibushi, Wesfalia),Fresh Water Generation Plant (Desalination Plant), UV treatment, re-hardening & mineralization of fresh water, Heat exchangers, Boilers ,Main Engines, Auxiliary machines, etc.
? Worked On Main Engines: HYUNDAI B&W 7S60MC, Single acting,2-S,
? Crosshead, Reversible, Turbocharged
? M.C.R 19460 BHP @105RPM.
? N.C.R 17510 BHP @101.4RPM.
? Worked On Auxiliary Engines (Generators): HYUNDAI MAN B&W, Type: 6L 23/30
? 1025 BHP @720 RPM, No. Of Sets: 3
? Worked On Auxiliary Boilers: HYUNDAI - HMT 55
? Evaporation: 55000kg/hr, Working Pressure: 16kg/cm
? Operation & Maintenance of Framo System(Hydraulics), Inert Gas Plant, Sewage Plant & system (Vaccum /non vaccum), MGPS (Marine growth prevention system),
? Testing of Bunkers, Fuel Oils, Lubricating oils, Boiler Water test, Drinking water test, etc.
? Testing, Inspection & Maintenance of Safety Equipments & Accessories (Emergency fire pumps, Foam Pumps, Ventilators, Fire hydrants, Fire fighting appliances, SCBA (Self contained breathing apparatus, EEBD (Emergency escape breathing device), Fire Plan Management & training,
? Concern about safety in every aspect with proactive sight & measures, Environmental Pollutions, Environmental engineering, Loss Prevention & Control, Safety Management, Risk assessment and management, Identification and analysis of risks and issues, Risk Management Strategy and Planning ,Risk and issue review and reporting, Issuing Work Permit, Lockout Tag out permit & Management, handling & reporting near mist, Incidents, accidents & Pollution.
? Possessed knowledge of SOLAS, MARPOL, ISGOT, Classification Societies & Flag state, etc.
? Hands on experience in Computerized Maintenance Management System (CMMS), where SAP (Plant Maintenance) has become the life line of most of the big and Multinational Industries.
? Efficiently worked on RAST, AMOS & other SAP systems for inventory management, updating work list, raising requisitions, updating PMS, Operations history reports & records, non conformities.
? Accountable for survey, inspections & certifications of all machineries, structures, equipments.
? Port Equipments handled: (Forklift, Chassis, Trailers, Head Truck, Cranes (All types), Container Handler, Reach Stacker, Spreader, Goose Neck, etc.).
? Accredited with Best Behaviour & Professionalism Award onboard & appreciations from various Captains / Chief Engineers during Junior Engineer tenure.
Membership
Member Of Charter Institute Of Insurance. CII UK.
Member Of Royal Institute of Naval Architects . RINA UK.
Member Of American Society Of Mechanical Engineers. ASME USA.
Acquiring Membership Of Society of Naval Architects & Marine Engineer. SNAME USA.
Acquiring Membership Of Lifting Equipment Engineers Association. LEEA UK.
Documents
Holding a valid Indian Passport and UNITED STATES OF AMERICA C1D VISA.
Possesing AUSTRALIA VISA 491a.
Possesing an INTERNATIONAL DRIVING LICENSE (Drived in UK) .
Possesing an GCC Saudi Arabia DRIVING LICENSE.
Possesing CDC & INDO'S Number.
UK COC (Certificate Of Competancy).
Liberia CDC.
COE Liberia.
Singapore COE.
Bahams COC.