Back to Resumes List

Electrical Engineer


I would like to work as an engineer in a maritime industry. I want to apply my skills and knowledge and be able to experience maritime world. May it be in a cruise ship, tanker or any vessel.



Position : Operations Engineer

Company : San Miguel Yamamura Packaging Corporation

Plant Assigned : Metal Closures and Lithography Plant

Employment Period : April 2009 - present


? Takes the lead in the analysis, installation and commissioning of automatic air pressure regulators and sensors in the production lines, which detect and protect products and machines during sudden drop and rise of air pressures.

? Supervise and assisted in the installation and commissioning of heat recovery system in lithography production lines.

? Made and documented the maintenance schedule and activities in maintaining the machineries and electrical panels under production.


? Handles the preventive maintenance activities of production equipment and facilities.

? Takes the lead in implementing the planned maintenance such as inspection, lubrication, commissioning and fine tuning of production machineries.

? Investigates and documents major breakdown of production machines indicating findings, causes, and recommendations.

? Takes lead role in troubleshooting of production machines during breakdowns

? In charge of maintaining the following systems:

• Programmable Logic Controller Systems

• Electrical and Electronic Systems

• Heating, Ventilating and Cooling System under production

• Pollution Control Devices (Afterburner and Oven Devices)

• Machine Control Systems

• Auxiliary Equipment

? Conducts inspection on production machineries after planned preventive maintenance and submits report on findings and status to the immediate superior.

? Documents adjustments, troubleshooting guides and part replacements made during maintenance.

? Takes the lead in analyzing, documenting, reporting and implementation of projects geared towards the improvement of operations (product enhancement, machine, tools and spares management).

? Handles production planning that includes materials and 16 operators’ management prior to production run.

? Prepares work schedule of 14 operators and 2 technicians.

? Prepares and established production and materials planning via SAP Application

Position : Voice Engineer

Company : Industrial Controls Corporation

Facility Assigned : Accenture

Employment Period : Sept. 2008 - April 2009

Job Description :


? Proactively monitors voice systems to ensure maximum availability and optimal operation of office phone systems including Avaya PBXs, phone handsets, MDF/ IDF wiring, VoIP systems and voice circuits.

? Responds to trouble tickets in a timely manner and resolves issues (e.g. activation/ deactivation, authorization code, phone features, no dial tone)in accordance to service level agreement (SLA). Follows proper escalation and notification procedures.

? Work closely with contractors /vendors to address, track, execute and proper closure of request for system enhancement /improvement and backup.

? Provide assistance to Project Account Architects regarding voice applications based on technical understanding and analysis of the client requirements.

? Work closely with service providers to resolve service outages and in provisioning new services such as T1 and ISDN PRI/BRI service. Carry out equipment acceptance testing and system integration testing on telecommunication systems.

? Handle call accounting by Call Detail Recording (CDR) or Station Message Detail Recording (SMDR) analysis.

? Writing technical documents such as user manual and operation & maintenance (O&M) documentation.

? Participate in technology transfer and administrative trainings provided by Accenture, as well as any outside seminars provided by vendors.

? Responsible in ensuring/maintaining voice security in accordance with Accenture global and local security standards and best practices.

Position : Technical Assistant

Company : Cebu Holdings Inc.

Employment Period : October 2007- August 2008

Property Assignment : City Sports Club-Cebu


? Made and documented the maintenance schedule and activities in maintaining the equipment, motors, generator and electrical panels of the facility.


? Handles property management at City Sports Club Cebu.

? Supervise the Engineering Department in doing civil works, mechanical works, plumbing works and electrical works.

? Supervise eight (8) maintenance staff in their daily activities for the continuous operation of the facility.

? Prepare daily activities and action plans for the improvement of the facility.

? Prepare work schedule for the maintenance staff.

? Prepare and implement preventive maintenance schedules for all mechanical and electrical equipment of the facility.

? Prepare weekly accomplishment reports and memo’s to be submitted to the property administrator, department manager and General Manager.

? Facilitate and monitor the purchase and release of materials for the engineering department.

? Coordinate with contractors for major rehabilitation and work requirement needed at the facility.

? Implement energy conservation program at the facility.

? Facilitate and address complains by club members, tenants and from other departments.

? Familiar with ISO 14001:2004 (Environmental) and OHSAS 18001:1999 (Health and Safety).

? Prepare ISO related documents for safe keeping, monitoring and implementation.


? Oversee and maintain the continuous operation of a 2MW generator (Cummins) by doing the following: check temperature alarm, check radiator fan motors 1 & 2, radiator pump, coolant level, battery voltages, fuel level, electrolyte level of the battery, emergency stop, oil level, leak check, paint, sight glass, fittings & valves, flexible hose, fuel pumps 1 & 2, battery charger, battery terminal, control panel, terminals & fuse, fuel filter, air filter, and genset mode.

? Oversee and maintain continuous operation of 25TR’s, 20TR’s, 15TR’s, 10TR’s, 7.5TR’s, 5TR’s and 3TR’s ACCU’s by doing the following: cleaning and checking of air filters, coils, belts, fan motor, terminal lugs, cooling fins, bearings, blower blades, thermometers & pressure gauge, air supply, control panels, drainage & equipment surface. For the condensing unit, check and clean the following: fan motors, fins coils, compressor, high side switch, low side switch, high pressure and low pressure gauge and record the current drawn.

? Oversee and maintain continuous operation of 100hp, 7.5hp, 5hp, 3hp, 2hp, 1hp and 3/4hp motor pumps by doing the following: check and observed pump capacity, check and record current drawn, clean and check electrical terminals, check for unusual sound, check motor alignment, check leaks on joints and flanges, check float switch and indicator lights.

? Oversee and maintain continuous operation of 15hp, 10hp, 7.5hp, 5hp, and 2hp supply fans and exhaust fans by doing the following: check unit for noise and vibration, check electrical control switch, dust off surface, check air leaks, clean electrical panel and switch breaker, clean fan assembly, check light indicator, record actual current drawn, check canvass cloth connector, check motor bearing, check pillow block bearing and check v – belt.


Employment Period : April 2006 – June 2006

Position : Cadet Engineer

Job Description :


? Hands – on experience in Power Generation ( 69KV ) preventive maintenance.

? Analyze and correct abnormalities encountered in Power Generation.

? Familiar, aware and acquainted with Power Generation materials, facilities, tools and equipment.

? Familiarize and aware the internal nature of the power generation.


? Assist in the permanent electrical installation in all areas within the power plant.

? Check and monitor always the operation of the generating units.


? Assist in doing maintenance work of power transformers inside the power plant.

? Assist in doing maintenance work of circuit breakers (vacuum circuit breakers, air blast circuit breakers and SF6 circuit breakers) inside the power plant.


I am a Registered Electrical Engineer


QC Total Problem Solving Techniques

SMYPC Learning Center

Nov. 13-16, 2012

FESTO Electric Drives

Waterfront Hotel Cebu

Oct. 16, 2012

SAP Production and Materials Planning Training

SMYPC Learning Center

Aug. 12-13, 2012

Total Preventive Maintenance

Neville Clarke

Alpa City Suites

May 9-11, 2012

Statistical Process Control

Neville Clarke

Alpa City Suites

May 29-31, 2012

Food Safety and HACCP Training

SGS Audit

SMYPC Learning Center

April 2012

FESTO Actuators

Days Hotel

February 2012

Industrial Calibration

Cebu Beverage Packaging Plant

Dec. 11-12, 2011

Siemens PLC

1521 SMC Complex

September 2011

Industrial Motor Control Course

Second Semester 2006-2007

Cebu Institute of Technology

N. Bacalso Ave., Cebu City


Siemens Programmable Logic Controller (PLC)

Omron Programmable Logic Controller (PLC)

Lenze Frequency Drives

ABB Power Controls and Drives

Motor Control

Power Plant Generation and Transmission


Cebu city, Philippines,
View Contact Information