Back to Resumes List

Objective


To secure a rewarding and challenging position in engineering field with a quality organization leading to increasing responsibility and career advancement.


Experience


Oct 2007 to Present:



Working with Lamprell Energy LTD, Sharjah, UAE as QC Engineer



Job Responsibilities:



? Review of bid documents to identify specific areas of concern or non standard requirements. Review of Project scope of work, project specification, drawings, NDT procedures as per Project Specification and Standards, welding documents like. WPS, welder qualification, weld Plan. Preparation and submission of Inspection Test Plan’s / Activity Control Plan’s for assigned projects. Evaluation and Interpretation of NDT / Survey / Corrosion test results.



? Execution of all required Inspections within the assigned project and recording the results of inspections. Coordination and control of inspectors and inspection services (including sub contract services) for all discipline inspectors within assigned projects. Analysis of project production activity with regard to quality and quality defects and reporting the analysis to the Quality Manager. Liaising with and advising production supervision and project management on matters related to Project Quality and error prevention.



? Involved in inspection of Mobile Offshore Drilling Units during new fabrication & refurbishments. Carried out QA/QC activities during new fabrication of Spud cans, Legs, Cantilever, sub base, substructure, Heli deck, Accommodation, Hull structures including preload, voids, diesel, drilling water, brine tanks, all types of process piping like high pressure mud, cement, diverter, BOP, drill water, fire water, sprinkler, raw water, bilge piping as well as crane inspection etc.



? Present items for inspection as per inspection test plan and as per agreement existing (verbal or written) and prepare, verify and issue all reports including inspections by class and owners and obtain their signatures for acceptance. Witnessing during welding procedure / performance tests, Mechanical tests. Witnessing during Hydro Tests, Pneumatic Tests, and vacuum test. Witnessing repair removal, Checking of Welding Parameters. Approval of Welder qualification. Monitoring activities pertaining to QC role. Coordination, Review and submission of final Quality related documentation.



? Involved in inspection of onshore and offshore Oil & Gas plants during new fabrication, in service, shutdown and maintenance. Selection of proper material, WPS, welding consumables during repair works. Review of radiographic films. Review drawings, specification with a view to check material requirements. Painting inspection of static equipments and process piping as per applicable specifications. Coordination with other departments, consultants. Inspection of pressure vessels, columns, heat exchangers, boilers, storage tanks, Horton spheres, process piping, structures during shut down and maintenance. Visual inspection for external corrosion. Selection, execution, review of proper NDT methods to monitor corrosion, cracking. Recording all inspection observations and recommendation for corrective measures. Witnessing pressure test and certifying pressure relief equipments during plant shut down. Compilation and review of final inspection related documents



Major Clients worked with:

1. NDC (New built Rig class LTI 116E)

2. Scorpion Offshore Ltd (New built Rig class LTI 116E)

3. Hercules Offshore

4. Nabors Drilling International

5. Noble Drilling International

6. Transocean Inc

7. ENSCO offshore International



Some of other Clients: Millenium Offshore Services, Grup Servicii Petrolier, ADOC(Japan) Abu Dhabi offshore, Qatar Petroleum, Shell Exploration BV (Iran Offshore), EPC (Iran Offshore), SBM



May 2006 to Sept 2007:



Working with QGM GROUP LLC, Sharjah, UAE as QA/QC Inspector.



? Job responsibility starts from executing the work following the Inspection and test plan, method statement & risk assessment. Witness and approval of Welder qualification. Verifying the various procedures like NDT, PWHT, pressure testing, painting procedures as per the requirements. Reviewing material certificates. Review design documents with regard to material selection.



? Perform shop and field inspection, advice on repair techniques, selection of proper material, welding procedures, inspection and testing requirements.



? Welding inspection of total refurbishment & maintenance job of mobile drilling units Oil&Gas, onshore, offshore, and marine projects. Fit up and welding inspection on Helideck, Bottom hull repairs, Cantilever, Pushup & Hold down structures, Spud can modification, Leg Extensions, Hull Piping, etc., Marking up in drawings, Requesting client representative and surveyor for inspection, Requesting and monitoring NDT, Monitoring welding, Witnessing pressure test, Cooperating with Engg and construction department for any fabrication discrepancies, Compilation of records etc.,



? Review and final acceptance of QA/QC related documents



Client: Thule Drilling ASA



Sept. 2002 to April 2006:



Working with INTERNATIONAL INSPECTION SERVICES LTD. (INSPEC), Sharjah, UAE as QA/QC Inspector.



? Job responsibility includes Welding & Painting Inspection at various stages of total refurbishment & maintenance job of Jack-up drilling rigs, Offshore structures, Process piping, Oil & gas plant, Refinery projects.



? Welding inspection of total refurbishment & maintenance job of jack-up drilling rig which includes but not limited from fabrication to final documentation of Helideck, steel-work of Hull including preload, voids, diesel, drilling water, brine tanks; black & grey piping; Raw-water tower & piping; leg extension & strengthening; exhaust ducting; Cantilever re-enforcement with hold-downs, push-ups; sponsons; sub-base; mud-pump & mud-pit; associates piping as well as crane inspection.



? Review of radiographic films, witnessing leak test, vacuum-box test, hydro test, pneumatic test; Accommodation-insulation, piping such as fire water, sprinkler, water supply, HVAC systems. Preparing & clearing Punch lists with client inspectors, involved in pre commissioning & commissioning of various systems, etc., Preparation of quality related documents.



? Carryout shutdown inspection activity for pressure vessels, storage tanks, Horton spheres, heat exchangers, boilers, process piping, etc. Corrosion inspection on pressure vessels, process piping, recording all inspection findings and advice on repair work, material selection, welding procedure selection. Identifying locations susceptible to accelerate corrosion. Selection of proper NDT techniques for effective monitoring of corrosion. Review and supervise NDT activities. Condition monitoring of safety relief valves and prescribe repairs if any



Major Clients: ENSCO, Gulf Drilling Int’l, Noble Drilling, Iranian

Drilling Company, Grup Servicii Petrolier, Transocean Inc, National Drilling Company, Nabors Drilling Int’l, Japan Drilling Company.



Some of other Clients: Sajaa plant, Takreer project, Qatar petroleum, Single Buoy Moorings Inc.





July 1999 to August 2002:



Working with QUALITY ENTERPRISES, Mumbai, India as QA/QC Inspector.



Job Responsibilities:



? Involved in inspection of onshore and offshore Oil & Gas plants during new fabrication, in service, shutdown and maintenance



? Inspection of stationary equipments, pressure relieving devices, process piping, structures during shut down and maintenance. To check condition of pressure relieving devices, prescribe repairs as required and witness relief pressure setting. Inspection for specific types of corrosion and cracking. Corrosion monitoring of process piping. Selection of proper NDT techniques for effective monitoring of corrosion. Recording all inspection observations and recommendation for corrective measures, based on findings for immediate as well as future actions.



? Knowledge of materials for equipment construction, welding and NDT methods. Selection of proper welding consumables, welding procedure for various types of steels Review and supervise NDT activities Review of Welding documents i.e. WPS, Weld plan and Test plan as per ASME Section- XI Part QW Article-I through Article- IV, ASME B 31.1 & B 31.3. Witness and approval of Welder qualification. Review of Drawings.



? Visual, Dimensional & Painting Inspection (at various stages) of vessels, storage tanks, structures, process pipings as per applicable standards. Incoming Material Inspection, Interpretation of Radiographic Films. Preparation of QA/QC related final documents.



? Witnessing during Mechanical Test. Hydro test, Pneumatic test, leak test, Carrying out NDT such as UT, MPI, DPI on various structural components on Jack-up rigs & Fixed platforms, T-K-Y tubular joints, on ASME coded pressure vessels and heat exchangers, allied structures, storage tanks, power piping and process piping, shafts, rolled bars, plates, forgings, castings, welded joints, seamless pipes, etc.,



Some of the Major Projects/Clients involved with:

1. Reliance Petrochemicals Ltd. – Patalganga & Surat

2. HPCL Refinery – Mumbai.

3. ONGC Refinery – Uran.

4. BPCL Refinery – Mumbai.

5. Petronet LNG – Dahej.

6. IPCL Refinery – Panipat

7. Transocean Inc (Rig CE Thornton) – Mumbai Offshore


Education


EDUCATIONAL QUALIFICATION:



Bachelor of Engineering (B.E.) in Industrial Production with First Class from Manipal Institute of Technology, Manipal, Karnataka, India.



TECHNICAL QUALIFICATION:



CSWIP 3.1 Certified Welding Inspector.

BGAS Painting Inspector Grade 2

ASNT Level II in 1. Ultrasonic Testing

2. Magnetic Particle Testing

3. Liquid Penetrant Testing

4. Radiographic Testing (Interpretation)

COMPUTER SKILLS: Good working knowledge using Windows, MS Office, etc.


Certification


CSWIP 3.1 Certified Welding Inspector.

BGAS Painting Inspector Grade 2

ASNT Level II in 1. Ultrasonic Testing

2. Magnetic Particle Testing

3. Liquid Penetrant Testing

4. Radiographic Testing (Interpretation


Skils

 

Sharjah,
View Contact Information