Skip Navigation Links
Home
Search Jobs
Post Jobs
Search Resumes
Post Resume
Manage Your Account
 
Marine Hull Technician/ Ship fitter

Education, Experience & Location
Resume ID: 105472
Location: Pakistan PUNJAB CHAKWAL
Education: High school
Experience: 19 Years
 

  
Resume
Objective
i have been served in Pakistan Navy for 19 years as a hull tech /ship fitter on diffrent ships and dockyard(including USA ships),having vast experiance of my trade and can perform each and every type of job relevant to my trade.

Work Experience
PROFESSIONAL EXPERIENCE


-During 19 years of my service in PAKISTAN NAVY I have performed my duties on different class of ships ,establishment and workshops as a technician and supervisor .I have also worked on three mega projects as a technician and supervisor where I gain lot of experience in my trade jobs as a MARINE ENGINEERING HULL TECHNICIAN .These projects were launching of Agosta 90B sub marine ,MCMU mine sweeper and paneling of bulk head according to specifications and requirements of the task ..I have also lot of experience as a pipe fitter ,sheet metal cutting according to specification and drawing ,welding ,cutting and brazing work .I have also lot of experience about riveting and coupling /fastening of metal. Sheets .Summary of my experience is listed below.
(a)Welding, cutting and brazing.
(b)Repair ,maintenance of watertight doors and emergency escapes.
© Survey of hull ,including machinery spaces.
(d) Repair And maintenance of pipe fittings including socket tee ,nipple ,union ,elbow ,and water taps.
(e)Repair and maintenance of vent supply and exhaust trunking.
(f) Repair and maintenance of all types of sanitary fitting including drainage system and bathrooms tiles.
(g) maintenance of motor boat davit.
(h)Operating and maintenance of capstan ,windless anchor cables and its associated fittings.
(k)Maintenance of damage control equipments.
(m)Repairing of all wooden item including fittings of new ceiling ,wood paneling, polishing work and lay out of Formica.
(n)Repairing of GPR boats including rudder sheeve and steering wire.
(o)Securing of all types of new fittings onboard ship including A/C ,refrigerators ,cupboard ,bed locker and water cooler.
(p) Repairing and fitting of door locks ,new fitting and repair of all types of deck covering including PVC tiles.
(q)Maintenance of replenishment Winches and also maintenance ,operation of deck head cranes.

1-FROM 23rdAUG 2005 TO 21st AUG 2006 (PNS RAHBAR))
WORKED as a supervisor on GRP and wooden boats repairing and fitting of boats hull
b-new pipe line fitted at Jetty to filling station.
c-ventilation system and exhaust line fitted according to requirement new ventilation line made for ship,s galley


2-FROM 25th OCT 2003 TO 23rd AUG 2005 (PNT JANDAR)
a-work as supervisor on TUG and tug docked twice time in this duration
b-ship bottom survey carried out and weeks plate replace removed by gas cutting and new bottom plates welded.
c-new zinc anode fitted by welding
d-carried out new firefighting arrangement setting new sea water line fitted


3-FROM 28 SEP 2002 TO 25 OCT 2003 (PNS KARSAZ)

Participated in professional course MARINE ENGINEERING ARTIFICER(53 weeks)
along practical assignments at PAKISTAN NAVY MARINE ENGINEERING SCHOOL PNS KARSAZ


4-FROM 31 AUG 2000 TO 28 SEP 2002 PNS MOAWIN /OIL TANKER (HOLAND TECHNOLOGY)

a- worked as technician on ship welding projects
b-new sheet metal paneling made new for caption leeway and secure with roof. Confined spaces template made according to size ..
c-welding work on ships fire main line and repairing of ventilation ,chill water system.
d-riveting work carried out ship main control bulkhead paneling.


5-FROM 07th AUG 1998 TO 31 AUG 2000 PNS TAIMUR (GEARING CLASS SHIP USA TECHNOLOGY)
a- work as technician on SHIP,S LONG REFIT and complete following task
b-ships, structure survey and remove weak plate and welded new one.
c –ships under water fitting such as zinc anode fitting ,rudder fitting etc
d -new fire main line install
e- ventilation line repaired by gas welding

6-FROM 17th MARCH 1997 TO 07th AUG 1998( AGOSTA 90-B SUMBRINE CONSRRUCTION)

Worked as technician with submarines launching and welding work carried out on submarine pressure hull and also work with planning and weight estimation team .
a-new template made for crew cabin roof and bulkhead
b-welding work carried out on ship pressure hull

7-FROM 21 JULY 1994 TO 17th MARCH 1997 PNS JAUHAR (NAVAL ENGINEERING COLLAGE)
a- worked as technician and attach with MARINE ENGINEERING HULL WORKSHOP
b-arc welding ,gas welding , brazing, practical work carried out for officers classes
c-wood work job made new for officers classes
d-uses of hands tools like pop riveting machine ,electric drill machine fix and portable ,sheet metal cutting machine ,punching machine etc.


8-FROM 12th OCT1993 TO 21 JULY 1994 (PATRON -10 MISSILE BOATS SQUARDAN )
a-worked as technician on fitting of new radar ,organ welding carried out for this task
b -missile boat fire main line repair as well as new lines fitting
c -ventilation system repaired new mush room head fitted.
d-magazine riffle holding system made new with aluminum strips and secure with nuts bolt


9-FROM 18th OCT1992 TO12th OCT 1993 PNS KASAZ (PAKISTAN NAVY MARINE ENGINEERING SCHOOL


Attended LEADING MARINE ENGINEERING( HULL ) 48 weeks professional course along with practical assignment
Following practical worked carried out during this period
a-arc welding ,gas welding ,and brazing worked
b-sheet metal cutting work on band saw machine
c-uses of different types of tools and new template made work according to drawing


10-FROM 11th DEC 1990 TO 18th OCT 1992 PNS TABUK (BROOK GARYSA CLASS SHIP USA TECHNOOLPGY)

a-worked as helper with MARINE ENGINEERING (HULL)t
b-welding arc ,gas welding , organ welding work carried out in ships, welding shop on different task
c-brazing work carried out on ships chill water system line
d-air condition cooling line brazing work

11-FROM 01 SEP 1988 TO 11th DEC1990 PNS TAIMUR (GEARING CLASS SHIP USA TECHNOLOGY )

a-work as helper with shipwright staff
b-ships long refit work carried out .
c -RADAR SPS-40 fitted on 02 deck
d -ship NBCD marking work completed
e-wood work repairing work carried out new fitting
f- new exhaust pipe line fitted in paint store


Education
CURRICULM VITA

_OBJECTIVE


PERSONAL INFORMATIONS


NAME MUHAMMAD HAFEEZ
RANK MARINE ENGINEERING ARTIFICER (HULL)-IV (PAKISTAN NAVY)
MARITAL STATUS MARRIED

PROFESSIONAL QUALIFICATION DIPLOMA OF ASSOCIATE ENGINEERING (HULL)

DATE OF BIRTH 4 AUG 1970


CNIC NO. 37201-6711100-3

SERIVACE EXPERIENCE 19 YEARS IN PAKISTAN NAVY

PERMANET ADDRESS VILLAGE AND POST OFFICE TATRAL ,TEHSIL AND DISTRICT CHAKWAL POST CODE 48801

CONTACT NO +92-543-600462(RESIDENT)
+92-334-8745107(MOBILE)


ACADEMIC QUALFIUCATION


CERTIFACTE DIVISION/GRADE NAME OF INSTITUTE

MATRIC 2nd GOVT HIGH SCHOOL CHAKWAL



TECHNICAL & PROFESSIONAL QUALIFICATION

CERTIFICATE GRADE/% DURATION NAME OF INSTITUTION


MARINE ENGINEERING 82.7 53 WEEKS MARINE ENGINEERING SCHOOL
PNS KARSAZ
ARTIFICER (HULL)IV
COURSE


LEADING MARINE 70.9 48WEEKS MARINE ENGINEERING SCHOOL
PNS KARSAZ
ENGINEERING (HULL)
COURSE

HULL TECHNICiAN 58 24 WEEKS MARINE ENGINEERING SCHOOL
PNS KARSAZ
11-COUR


Certification
GENERAL QUALIFICATIONS
Security Motivation course
Air condition and Refrigeration course
Nuclear Biological Chemical Damage control including Fire Fighting course

GENERAL EXPERIENCE AND DUTIES
Division In charge duties on different ships and establishment
Security duty during launching Missile boat
CMEA(H)duty on PNT JANDAR.
CMEA(H)duty in PNS RAHBAR(PAKISTAN NAVAL ACEDEMY)
Duty MEA(H) and POOD on different ships and establishment


Skills
1-FROM 23rdAUG 2005 TO 21st AUG 2006 (PNS RAHBAR))
WORKED as a supervisor on GRP and wooden boats repairing and fitting of boats hull
b-new pipe line fitted at Jetty to filling station.
c-ventilation system and exhaust line fitted according to requirement new ventilation line made for ship,s galley


2-FROM 25th OCT 2003 TO 23rd AUG 2005 (PNT JANDAR)
a-work as supervisor on TUG and tug docked twice time in this duration
b-ship bottom survey carried out and weeks plate replace removed by gas cutting and new bottom plates welded.
c-new zinc anode fitted by welding
d-carried out new firefighting arrangement setting new sea water line fitted


3-FROM 28 SEP 2002 TO 25 OCT 2003 (PNS KARSAZ)

Participated in professional course MARINE ENGINEERING ARTIFICER(53 weeks)
along practical assignments at PAKISTAN NAVY MARINE ENGINEERING SCHOOL PNS KARSAZ


4-FROM 31 AUG 2000 TO 28 SEP 2002 PNS MOAWIN /OIL TANKER (HOLAND TECHNOLOGY)

a- worked as technician on ship welding projects
b-new sheet metal paneling made new for caption leeway and secure with roof. Confined spaces template made according to size ..
c-welding work on ships fire main line and repairing of ventilation ,chill water system.
d-riveting work carried out ship main control bulkhead paneling.


5-FROM 07th AUG 1998 TO 31 AUG 2000 PNS TAIMUR (GEARING CLASS SHIP USA TECHNOLOGY)
a- work as technician on SHIP,S LONG REFIT and complete following task
b-ships, structure survey and remove weak plate and welded new one.
c –ships under water fitting such as zinc anode fitting ,rudder fitting etc
d -new fire main line install
e- ventilation line repaired by gas welding

6-FROM 17th MARCH 1997 TO 07th AUG 1998( AGOSTA 90-B SUMBRINE CONSRRUCTION)

Worked as technician with submarines launching and welding work carried out on submarine pressure hull and also work with planning and weight estimation team .
a-new template made for crew cabin roof and bulkhead
b-welding work carried out on ship pressure hull

7-FROM 21 JULY 1994 TO 17th MARCH 1997 PNS JAUHAR (NAVAL ENGINEERING COLLAGE)
a- worked as technician and attach with MARINE ENGINEERING HULL WORKSHOP
b-arc welding ,gas welding , brazing, practical work carried out for officers classes
c-wood work job made new for officers classes
d-uses of hands tools like pop riveting machine ,electric drill machine fix and portable ,sheet metal cutting machine ,punching machine etc.


8-FROM 12th OCT1993 TO 21 JULY 1994 (PATRON -10 MISSILE BOATS SQUARDAN )
a-worked as technician on fitting of new radar ,organ welding carried out for this task
b -missile boat fire main line repair as well as new lines fitting
c -ventilation system repaired new mush room head fitted.
d-magazine riffle holding system made new with aluminum strips and secure with nuts bolt


9-FROM 18th OCT1992 TO12th OCT 1993 PNS KASAZ (PAKISTAN NAVY MARINE ENGINEERING SCHOOL


Attended LEADING MARINE ENGINEERING( HULL ) 48 weeks professional course along with practical assignment
Following practical worked carried out during this period
a-arc welding ,gas welding ,and brazing worked
b-sheet metal cutting work on band saw machine
c-uses of different types of tools and new template made work according to drawing


10-FROM 11th DEC 1990 TO 18th OCT 1992 PNS TABUK (BROOK GARYSA CLASS SHIP USA TECHNOOLPGY)

a-worked as helper with MARINE ENGINEERING (HULL)t
b-welding arc ,gas welding , organ welding work carried out in ships, welding shop on different task
c-brazing work carried out on ships chill water system line
d-air condition cooling line brazing work

11-FROM 01 SEP 1988 TO 11th DEC1990 PNS TAIMUR (GEARING CLASS SHIP USA TECHNOLOGY )

a-work as helper with shipwright staff
b-ships long refit work carried out .
c -RADAR SPS-40 fitted on 02 deck
d -ship NBCD marking work completed
e-wood work repairing work carried out new fitting
f- new exhaust pipe line fitted in paint store


Addition Info
PROFESSIONAL EXPERIENCE


-During 19 years of my service in PAKISTAN NAVY I have performed my duties on different class of ships ,establishment and workshops as a technician and supervisor .I have also worked on three mega projects as a technician and supervisor where I gain lot of experience in my trade jobs as a MARINE ENGINEERING HULL TECHNICIAN .These projects were launching of Agosta 90B sub marine ,MCMU mine sweeper and paneling of bulk head according to specifications and requirements of the task ..I have also lot of experience as a pipe fitter ,sheet metal cutting according to specification and drawing ,welding ,cutting and brazing work .I have also lot of experience about riveting and coupling /fastening of metal. Sheets .Summary of my experience is listed below.
(a)Welding, cutting and brazing.
(b)Repair ,maintenance of watertight doors and emergency escapes.
© Survey of hull ,including machinery spaces.
(d) Repair And maintenance of pipe fittings including socket tee ,nipple ,union ,elbow ,and water taps.
(e)Repair and maintenance of vent supply and exhaust trunking.
(f) Repair and maintenance of all types of sanitary fitting including drainage system and bathrooms tiles.
(g) maintenance of motor boat davit.
(h)Operating and maintenance of capstan ,windless anchor cables and its associated fittings.
(k)Maintenance of damage control equipments.
(m)Repairing of all wooden item including fittings of new ceiling ,wood paneling, polishing work and lay out of Formica.
(n)Repairing of GPR boats including rudder sheeve and steering wire.
(o)Securing of all types of new fittings onboard ship including A/C ,refrigerators ,cupboard ,bed locker and water cooler.
(p) Repairing and fitting of door locks ,new fitting and repair of all types of deck covering including PVC tiles.
(q)Maintenance of replenishment Winches and also maintenance ,operation of deck head cranes.
 

able seaman california canada captain chef chief cook chief engineer chief mate chief officer cook deck deck hand deck officer electrical electrical engineer engineer gp rating junior engineer long beach manager marine engineer marine surveyor master mate mechanic naval architect new york officer offshore ordinary seaman port engineer qmed radio officer safety safety officer sales seaman second mate second officer security steward superintendent surveyor tankerman third engineer wiper